Run the Server configuration
Remember to run the commands as an administrator user.
From the webadmin, open your web browser and type myserver:7178:
Or launch it from the Plastic SCM startup menu entry:
Or from the command line:
plasticd configure
Run the Client configuration
From the Windows GUI client configuration, open your command line and type:
plastic --configure
Or launch it from the Plastic SCM startup menu entry:
Or from the command line:
cm configure
Run the User management tool (umtool)
Remember to run the commands as an administrator user.
If you configure the Plastic SCM server to use the user and password authentication mode, you must manage the users that will work with Plastic.
From the webadmin, open your web browser, type myserver:7178, and navigate to the Authentication section:
Or launch it from the Plastic SCM startup menu entry and navigate to the Authentication section:
Or from the command line (parameters needed):
umtool
Learn how to use each command by typing the following:
umtool help <command_name>
Remember to run the commands as an administrator user.
From the command line:
plasticd start
From the Windows Service Manager, navigate to Control Panel > Administrative Tools > Services.
Or, run the following command:
services.msc
Remember to run the commands as an administrator user.
From the command line:
plasticd stop
From the Windows Service Manager, navigate to Control Panel > Administrative Tools > Services.
Or, run the following command:
services.msc
Restart the Plastic server
Remember to run the commands as an administrator user.
From the command line:
plasticd restart
From the Windows Service Manager, navigate to Control Panel > Administrative Tools > Services.
Or, run the following command:
services.msc
From the startup menu entry:
Or from the command line:
plastic
Run the Server configuration wizard
Remember to run the command as sudo.
From the webadmin, open your web browser and type myserver:7178:
From the command line:
/opt/plasticscm5/server/plasticd configure
Run the Client configuration wizard
From the Linux GUI client configuration:
plasticgui --configure
Or from the command line:
cm configure
Run the User management tool (umtool)
Remember to run the command as sudo.
If you configure the Plastic SCM server to use the user/password authentication mode, you must manage the users that will work with Plastic.
From the webadmin:
Open your web browser, type myserver:7178 and navigate to the Authentication section:
From the command line (parameters needed):
umtool
Learn how to use each command, by typing the following:
umtool help <command_name>
Remember to run the commands as sudo.
/etc/init.d/plasticsd start
or:
/opt/plasticscm5/server/plasticsd start
or:
service plasticsd start
Remember to run the commands as sudo.
/etc/init.d/plasticsd stop
or:
/opt/plasticscm5/server/plasticsd stop
or:
service plasticsd stop
Restart the Plastic server
Remember to run the commands as sudo.
/etc/init.d/plasticsd restart
or:
/opt/plasticscm5/server/plasticsd restart
or:
service plasticsd restart
Check the Plastic server status
Remember to run the commands as sudo.
/etc/init.d/plasticsd status
or:
/opt/plasticscm5/server/plasticsd status
or:
service plasticsd status
From the Plastic SCM application:
From the command line:
plasticgui
Run the Server configuration wizard
Remember to run the command as sudo.
From the webadmin:
Open your web browser and type myserver:7178:
Or, launch it from the PlasticSCM Server application:
Or from the command line:
/Applications/PlasticSCMServer.app/Contents/MacOS/plasticd configure
Run the Client configuration wizard
From the Mac OS GUI client configuration:
plasticgui --configure
Or from the command line:
cm configure
Run the User management tool (umtool)
Remember to run the command as sudo.
If you configure the Plastic SCM server to use the user/password authentication mode, you must manage the users that will work with Plastic.
From the webadmin:
Open your web browser and type myserver:7178 and navigate to the Authentication section:
Or, launch it from the PlasticSCM Server application and navigate to the Authentication section:
From the command line (parameters needed):
/Applications/PlasticSCMServer.app/Contents/Applications/umtool.app/Contents/MacOS/umtool
Learn how to use each command by typing the following:
/Applications/PlasticSCMServer.app/Contents/Applications/umtool.app/Contents/MacOS/umtool help <command_name>
Remember to run the command as sudo.
launchctl load /Library/LaunchDaemons/com.codicesoftware.plasticscm.server.plist
Remember to run the command as sudo.
launchctl unload /Library/LaunchDaemons/com.codicesoftware.plasticscm.server.plist
From the PlasticSCM application:
Or from the command line:
open /Applications/plasticscm.app
Find the Plastic SCM license here
/Applications/PlasticSCMServer.app/Contents/MonoBundle/plasticd.lic